Business Printer

By vie nasution Oct 25, 2010 0 comments
The HP LaserJet 4000 Printer is an Ideal Business Printer

The HP LaserJet 4000 printer is ideal for a business that needs a monochrome laser printer. An easy to use printer with many features, it offers a power saver that you can program in just minutes and a long-lasting HP C4127A toner cartridge. It's easy to set up and offers reliable speed and high resolution.
This printer has a fast start with just 12 seconds to begin a print job. It has a high print speed at 17 ppm. It comes set to a 600 x 600 dpi resolution with 220 levels of gray scale. This will deliver quality documents. For even finer resolution it can be changed to 1,200 x 1,200 dpi. This will affect the number pages per minute printed. The toner is HP precision which allows for clean, clear printing. Its toner cartridge prints 10,000 pages. The printer itself is capable of handling a large capacity of work. Its duty cycle is 65,000 pages per month.
The printer paper tray will hold a whole ream of paper, 500 sheets. The feeder tray holds another 100 sheets of paper or 75 envelopes. A total storage of 600 sheets. If duplex printing is needed there is an optional duplex tray. There is also an additional paper tray that holds 500 sheets that is available. That would be a total of 1,100 sheets ready for printing before needing to add paper again. The output tray has sensor so you are aware of when the 250 sheet tray has been filled.
There is an output tray in the rear of the printer. This is where those things printing from the feeder tray output. It holds 50 sheets. With the two different trays you can print more than one size document. It can print several different size pages. As small as 3 x 5 and as large as 8.5 x 14 and can handle paper from 16 to 53 lbs.
The printer has a 100 MHz processor. It is capable of network printing with two EIO slots to connect to the business network. It has an internal 4 MB memory. The memory is expandable up to 100 MB. Three DIMM (dual in line memory module) slots will hold 4, 8, 16 or 32 MB of RAM. With more memory print jobs will process more quickly, eliminating any back ups.
It works with Mac and Windows operating systems. There are two slots for flash memory. These will hold 2 MB and 4 MB. They can permanently load the printer. Their use is for signatures, fonts and forms. A 10/100 Ethernet port is available as well as serial and parallel ports.
It does not need much space for all it is capable of. It weighs just 39.27 pounds. It will fit on a desk top if necessary. The height is 13.3 inches, the width 15.4 inches and the length 16.77 inches. With either of the additional paper trays that the printer would sit on, the height would increase to 18 inches. Sharing is sexy

Related posts

0 comments for this post

Leave a reply